11/16" 17.4mm Nylon Balls
制作紹介
Bell Ball mainly produce plastic balls material: POM PP Nylon, Acrylic, ABS, HDPE, PTFE etc.
![]() アセタールPOMプラスチックボール(デルリン) 密度:1.4-1.41g / cm3 グレード:G {{0}} G3(0.01-0.05mm) Feature: Delrin (PolyoxyMethylene), also known as Acetal, Polyacetal, and POM,similar to nylon slightly, harder larger density low water absorption,the most hard and wear resistant materials.Applications:POM ball table,drawer slide device bearings, rollers, valves, electronic apparatus, sailing apparatus. |
Polypropylene PP plastic ball
密度:約0 .88g / cm3
グレード:G {{0}} G3(0.01-0.05mm)
特徴:優れた耐性と耐薬品性、
水よりも密度が低く、最高融点
アプリケーション:チェックバルブ、リリーフバルブ、フロートバルブ、輸血、レベル校正インジケーターに使用されます。 また、軽負荷のボールベアリングとして多くのメーカーに適しています。

![]() PA66ナイロンプラスチックボール ナイロン6/6は、高強度(特に高温で)、低温での靭性、剛性、耐摩耗性、耐摩耗性、低摩擦係数、優れた耐薬品性を提供します。 すべてのナイロンは湿気を吸収します。 これにより、柔軟性と耐衝撃性が向上します。 強度と剛性が要求される衝撃の強い用途に使用します。 |
PTFE plastic balls
密度:約2.2g / cm3グレード:G {{0}} G3(0.01-0.05mm)
特徴:優れた化学的安定性、耐食性、シーリング、高潤滑性非-粘着性、最も耐食性があり、電気絶縁材料を備えています
使用法:機器の条件下での極低温液体および酸。
| 素材 | ナイロンボール(PA66) |
| サイズ | 1.588mm-100mm |
| 学年 | G{{0}}G3 (±0.01-0.05mm) |
| 密度 | 周り:1.1g / cm3 |
| 特徴 | ナイロンは、石油製品およびあらゆる種類の化学製品の中性特性に適応するために、好ましくはアルカリ金属を有する。 |
| アプリケーション | チェックバルブ、軽負荷、ノブプルスイッチ、低-コストで使用されますが、柔軟性要件の向上、高硬度の側面にも使用されます |
Nylon Balls are used in a variety of bearing, and seal applications. These balls are precision ground for tight tolerance are made of solid, high-quality thermoplastic. Nylon PA66 offers high strength (especially at elevated temperatures), toughness at low temperatures, stiffness, wear and abrasion resistance, low coefficient of friction and good chemical resistance. All Nylons absorb moisture; this increases flexibility and impact resistance. Use for high impact application requiring strength and rigidity. UV light results in degradation over time. Resists hydrocarbons, aromatics, aliphatic solvents, automotive oils and fuels, and refrigerants. Attacked by strong acids, bases, and phenol. Gradually attacked by hot water. Lightweight -- approximately 1/8 the weight of bronze, 1/7 the weight of cast iron, and 1/2 the weight of aluminum -- which reduces both the inertial and static loads and eases the handling of large components during maintenance or replacement procedures.
Color: Natural (yellow-cream color)
It offers good chemical resistance to common chemicals, alkalies, weak acids and is compatible with motoroil, transmission fluid, and methanol.
一般的な用途には、ネジ、歯車、ノブ、および正式に金属で作られたその他の低応力の産業用アプリケーションが含まれます。



パッケージ:

FAQ:
ナイロンボールの通常のサイズはどれくらいですか?
Nylon balls 1/16" 2mm 3/32" 2.5mm 3mm 1/8" 4mm 3/16" 5/32" 5mm 6.35mm 1/4" 7mm 7.144mm 8mm 9mm 3/8" 10mm 11mm 7/16" 11.125mm 12mm 1/2" 14.288mm 5/8" 16mm 20mm 25.4mm 22.225mm diameter
ベルボールはお問い合わせを大歓迎です!
人気ラベル: 11/16" 17.4mm nylon balls, China, manufacturers, suppliers, factory, wholesale, cheap
あなたはおそらくそれも好きでしょう
お問い合わせを送る

















